C
H A P T E R
Use these screens to control which computers can use which services to access the P-2024 on
each interface.
9.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which P-
2024 interface (if any) from which computers.
You can manage your P-2024 from a remote location via:
Table 31 Management Interfaces
•
Internet (WAN only)
•
LAN only
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The P-2024
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP
9.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1 You have disabled that service in one of the remote management screens.
2 The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the P-2024 will disconnect the session immediately.
3 There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
4 There is a firewall rule that blocks it.
P-2024 User's Guide
Remote Management
•
ALL (LAN and WAN)
•
Neither (Disable).
9
93