Advanced Sip Setup Screen - ZyXEL Communications P-2024 User Manual

Table 21 VoIP > SIP > SIP Settings
LABEL
Number
SIP Local Port Enter the P-2024's listening port number, if your VoIP service provider gave you
SIP Server
Address
SIP Server
Port
REGISTER
Server
Address
REGISTER
Server Port
SIP Service
Domain
Send Caller ID Select this if you want to send identification when you make VoIP phone calls.
Authentication
User Name
Password
Apply
Reset
Advanced Setup
APPLY to ALL
SIP

6.2.2 Advanced SIP Setup Screen

Use this screen to maintain advanced settings for each SIP account. To access this screen, click
Advanced Setup in the VoIP > SIP > SIP Settings screen.
P-2024 User's Guide
DESCRIPTION
Enter your SIP number. In the full SIP URI, this is the part before the @ symbol.
You can use up to 127 printable ASCII characters.
one. Otherwise, keep the default value.
Enter the IP address or domain name of the SIP server provided by your VoIP
service provider. You can use up to 95 printable ASCII characters. It does not
matter whether the SIP server is a proxy, redirect or register server.
Enter the SIP server's listening port number, if your VoIP service provider gave
you one. Otherwise, keep the default value.
Enter the IP address or domain name of the SIP register server, if your VoIP
service provider gave you one. Otherwise, enter the same address you entered in
the SIP Server Address field. You can use up to 95 printable ASCII characters.
Enter the SIP register server's listening port number, if your VoIP service provider
gave you one. Otherwise, enter the same port number you entered in the SIP
Server Port field.
Enter the SIP service domain name. In the full SIP URI, this is the part after the @
symbol. You can use up to 127 printable ASCII Extended set characters.
Clear this if you do not want to send identification.
Enter the user name for registering this SIP account, exactly as it was given to
you. You can use up to 95 printable ASCII characters.
Enter the user name for registering this SIP account, exactly as it was given to
you. You can use up to 95 printable ASCII Extended set characters.
Click this to save your changes and to apply them to the P-2024.
Click this to set every field in this screen to its last-saved value.
Click this to edit the advanced settings for this SIP account. The Advanced SIP
Setup screen appears.
This button is available only when you select SIP1 from the SIP Account list.
Click this to set every SIP account on the P-2024 (SIP1 ~ SIP24) to use SIP1's
SIP Server settings and Advanced Setup configuration. This function does not
change the settings in the Authentication section (User Name and Password).
Note: If you made changes in the SIP1 screen, you must click
Apply to save those changes before you click APPLY to
ALL SIP.
Note: When you click APPLY to ALL SIP, the Number field of each
SIP account (including SIP1) is reset to its default value. You
must then configure each account's Number individually.
Chapter 6 SIP
73