Table 30 Voip > Phone Book > Incoming Call Policy - ZyXEL Communications P-2024 User Manual

Chapter 8 Phone Book
Configure a SIP account to use a call-forwarding table in the VoIP > SIP > SIP
Settings > Advanced screen.
Each field is described in the following table.
Table 30 VoIP > Phone Book > Incoming Call Policy
LABEL
Table Number
Forward to
Number Setup
Unconditional
Forward to
Number
Busy Forward
to Number
No Answer
Forward to
Number
No Answer
Waiting Time
Advanced Setup
#
Activate
Incoming Call
Number
Forward to
Number
Condition
88
DESCRIPTION
Select the call-forwarding table you want to see in this screen. If you change this
field, the screen automatically refreshes.
The P-2024 checks these rules, in the order in which they appear, after it checks
the rules in the Advanced Setup section.
Select this if you want the P-2024 to forward all incoming calls to the specified
phone number, regardless of other rules in the Forward to Number section.
Specify the phone number in the field on the right.
Select this if you want the P-2024 to forward incoming calls to the specified phone
number if the phone port is busy. Specify the phone number in the field on the
right. If you have call waiting, the incoming call is forwarded to the specified phone
number if you reject or ignore the second incoming call.
Select this if you want the P-2024 to forward incoming calls to the specified phone
number if the call is unanswered. (See No Answer Waiting Time.) Specify the
phone number in the field on the right.
This field is used by the No Answer Forward to Number feature and No Answer
conditions below.
Enter the number of seconds the P-2024 should wait for you to answer an
incoming call before it considers the call is unanswered.
The P-2024 checks these rules before it checks the rules in the Forward to
Number section.
This field is a sequential value, and it is not associated with a specific rule. The
sequence is important, however. The P-2024 checks each rule in order, and it
follows only the first one that applies.
Select this to enable this rule. Clear this to disable this rule.
Enter the phone number to which this rule applies.
Enter the phone number to which you want to forward incoming calls from the
Incoming Call Number. You may leave this field blank, depending on the
Condition.
Select the situations in which you want to forward incoming calls from the
Incoming Call Number, or select an alternative action.
Unconditional - The P-2024 immediately forwards any calls from the Incoming
Call Number to the Forward to Number.
Busy - The P-2024 forwards any calls from the Incoming Call Number to the
Forward to Number when your SIP account already has a call connected.
No Answer - The P-2024 forwards any calls from the Incoming Call Number to
the Forward to Number when the call is unanswered. (See No Answer Waiting
Time.)
Block - The P-2024 rejects calls from the Incoming Call Number.
Accept - The P-2024 allows calls from the Incoming Call Number. You might
create a rule with this condition if you do not want incoming calls from someone to
be forwarded by rules in the Forward to Number section.
P-2024 User's Guide