C
H A P T E R
This chapter gives details about your P-2024's hardware and firmware features.
14.1 General P-2024 Specifications
The following tables summarize the P-2024's hardware and firmware features.
Table 55 Hardware Specifications
Dimensions (W x D x H)
Power Specification
Ethernet Ports
Phone Ports
Operation Temperature
Storage Temperature
Operation Humidity
Storage Humidity
Table 56 Firmware Specifications
FEATURE
Default LAN IP Address
Default Subnet Mask
Default Password
Device Management
Firmware Upgrade
Configuration Backup &
Restoration
Dynamic DNS Support
P-2024 User's Guide
Product Specifications
355 x 200 x 55 mm
90 ~ 240 V AC, 50 ~ 60 Hz
Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
RJ-21 / Telco-50
0 ~ 45 C
-25 ~ 70 C
10% ~ 85% (non-condensing)
5% ~ 90% (non-condensing)
DESCRIPTION
192.168.5.1
255.255.255.0 (24 bits)
1234
Use the web configurator to easily configure the rich range of features on
the P-2024.
Download new firmware (when available) from the ZyXEL web site and
use the web configurator, an FTP or a TFTP tool to put it on the P-2024.
Note: Only upload firmware for your specific model!
Make a copy of the P-2024's configuration. You can put it back on the P-
2024 later if you decide to revert to an earlier configuration.
With Dynamic DNS (Domain Name System) support, you can use a
fixed URL, www.zyxel.com for example, with a dynamic IP address. You
must register for this service with a Dynamic DNS service provider.
14
129