Prepare To Change Your Internet Adapter Settings - NETGEAR WNCE3001 User Manual

9. Congratulations! Your installation is complete. You can return your computer to its usual
setup and begin using the Internet adapter.

Prepare to Change Your Internet Adapter Settings

If you want to change the settings for the Internet adapter after installation, then you need to
connect it to a computer while you are making changes.
Note: If your Internet adapter is mounted on its stand, remove the stand
before disconnecting any cables.

To change your Internet adapter settings:
1. Connect your Internet adapter to a computer with an Ethernet cable.
2. Connect either the USB power cable or the power adapter cable that came in the product
package to the rear panel of your Internet adapter.
To supply power to your Internet adapter, use whichever method is more convenient for
you. See Power Connection Options
Figure 9. Connect the WNCE3001 to a laptop
3. Launch an Internet browser such as Mozilla Firefox or Microsoft Internet Explorer. In the
address field, type http://www.mywifiext.net.
Universal Dual Band WiFi Internet Adapter (WNCE3001)
on page 6.
Getting Started
9