NETGEAR WNCE3001 User Manual page 8

Universal Dual Band WiFi Internet Adapter (WNCE3001)
6. Disconnect the Ethernet and USB cables from your computer.
7. Connect the Internet adapter to your TV, XBox, or Blu-ray player.
If your device does not have a USB port, then use the power adapter cable that came
with your Internet adapter, and plug it into an electrical outlet. See
Options on page 6.
8. Place your adapter at its permanent location.
You can either mount your adapter to a wall or other flat surface, or you can mount it
vertically on its stand.
Note: To ensure correct heat dissipation and for router stability, it is
important that you place your router in an upright position.
• Wall mounting. If mounting the Internet adapter to a wall or flat surface, paste the
sticker above the product label on the back of the unit, and then attach the unit to the
surface.
Figure 7. Wall-mount the Internet adapter
• Stand mounting. If mounting the Internet adapter on its stand, attach the stand as
shown.
Figure 8. Attach the stand to the Internet adapter
For optimal performance, install the stand.
Getting Started
8
Power Connection