Advanced Ip Settings - GE 30 User Manual

Figure 31: Ethernet Setting screen
To define Ethernet settings:
1. Click Network on the main menu to display the Network screen.
2. Click Ethernet Setting Setup to display the Ethernet Setting screen.
3. Select an Ethernet type.
4. Select On in the DHCP box to enable DHCP (Dynamic Host Configuration Protocol)
if the network automatically supplies an IP address. Otherwise, select Off in the
DHCP box and continue with steps 5 through 9.
5. Enter the network's dynamic IP address in the IP edit box.
6. Enter the subnet mask in the Netmask edit box.
7. Enter the gateway IP address in the Gateway edit box.
8. Enter the DNS IP address in the DNS edit box.
9. Enter the secondary DNS IP address box in the DNS2 edit box, if required.

Advanced IP settings

Use the IP Advanced screen to define the connection port and bandwidth throttle
used for the Web browser. Bandwidth throttle lets you throttle the amount of network
data from the DVR to a client. Predefined bandwidth throttle settings include:
• 192 kbps
• 384 kbps
• 768 kbps
• 960 kbps
TruVision DVR 30 User Manual
Chapter 6: Advanced setup
61