Spot Monitor; Viewing In Full Screen; Viewing In Multiscreen - GE 30 User Manual

Note: To the camera title to a different position, right-click the mouse, and then select
a new position while in live mode.

Viewing in full screen

Press a numeric button to switch to the corresponding camera display. For example,
press 2 to view camera 2.

Viewing in multiscreen

Use the Display button on the front panel to cycle through different display formats.
Figure 10 below displays the multiscreen formats available as defaults.
Figure 10: Display formats
1
13
15
2 x 2

Spot monitor

To connect the spot monitor:
1. Connect the spot monitor to the Spot video out port on the back panel using a
composite cable.
2. While in live mode, press and hold a numeric key for two seconds on the front
panel or remote control.
3. The spot monitor displays the corresponding camera in full screen.
The spot monitor only supports full screen mode.
TruVision DVR 30 User Manual
1 2
3 4
2 x 2
1 3
2
14
4 5 6
16
7 8 9
3 x 3
5 6 9
7 8
11
2 x 2 2 x 2
1 2
8 9 10
5 6
11 12 13
9 10
14 15 16
13 14
3 x 3 4 x 4
Chapter 4: Basic operation
10
12
3 4
7 8
11 12
15 16
25