Cisco 880 Series Hardware Installation Manual page 83

Chapter 2 Installing the Router
All wireless LAN products in the 5.2/5.3GHz band cannot be used outdoors. Use the product only
Warning
indoors. Statement 372
Before you install the Cisco 890 series wireless router on a table, wall, or rack, connect the antennas to
Note
the back panel. It is difficult to attach the antennas after the router is installed.
To attach the radio antennas to your wireless router, follow these steps:
Manually screw the antennas tight to the RP-TNC connectors on the back of the router.
Step 1
Figure 2-1
Orient the antennas. For optimum wireless performance, the antennas should be perpendicular with
Step 2
respect to the floor.
If the router is being mounted on a desk, orient the antennas straight up.
a.
If the router is being mounted on a wall, orient the antennas perpendicular to the floor, as shown in
b.
Figure 2-2
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-12
Attaching Antennas to the Router
and Figure 2-3.
Installing the Router
2-5