Initial Configuration Of The Wireless Access Point - Cisco 880 Series Hardware Installation Manual

Initial Configuration of the Wireless Access Point

Initial Configuration of the Wireless Access Point

The embedded wireless access point (AP) runs its own IOS. You can initially configure the embedded
wireless AP by using one of the following methods:
•
•
For information on how to do basic wireless configuration on your router see the
Device"
Software Configuration
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
4-6
Cisco Configuration Professional (CP) Express
Setup command facility on the embedded wireless device
chapter of the Cisco 860 Series, Cisco 880, and Cisco 890 Series Integrated Services Routers
Guide.
Chapter 4 Initial Configuration
"Basic Wireless
OL-16215-12