Index Search; Performing An Index Search - Honeywell FUSION III DVR User Manual

6.13

INDEX SEARCH

Using the Index Search can greatly decrease the amount of time spent searching
through saved video. The Index Search allows a user to perform a search based on
criteria such as Sensor, Motion and Instant Record events.
1 Select All
Cameras
2 Multiple
camera
search
3 Select Time
4 Start Time
5 End Time
6 Sort Option
7 All Event

6.13.1 PERFORMING AN INDEX SEARCH

1. Select the Index Search button. The Index Search Option box will open.
2. Select a single camera or check the All Cameras option.
3. Select an event to search (sensor, motion, instant record) or select the All Event
option.
4. Press OK. There may be a delay while results are returned.
Results will be displayed in a column on the left side of the screen.
If no results are found, "NO IMAGE FOUND" will appear in the column.
5. Once the results are displayed, double-click on any one to search through them.
6. Once the desired image is found, apply it to the Main Search by selecting the
Close button at the bottom of the results column.
This option selects all cameras.
Select one or more cameras to
search.
The default search time is 24
Hours. If this option is select
then a Start Time and End Time
must be entered.
Specifies the Start Time for the
Index Search.
Specifies the End Time for the
Index search.
Searches by the selected
event: Sensor, Motion
Detection, or Instant Record.
Searches on all events (sensor,
motion, instant recording) for
the selected camera(s).
SEARCH OPTIONS
6
7
6–11