Ptz Status On Close; Activating The Ptz Status On Close Option - Honeywell FUSION III DVR User Manual

7.7

PTZ STATUS ON CLOSE

The PTZ Status on Close is an option that defines the default settings for a PTZ
camera when the controller is not open. This includes activating a Tour, moving to a
preset position or simply leaving the camera as it.
Stay Put
Start Tour
Go To Preset

7.7.1 ACTIVATING THE PTZ STATUS ON CLOSE OPTION

1. Start by creating a Preset or Tour for the selected camera.
2. Select either Start Tour or Go To Preset.
3. Press OK or APPLY to save.
This option leaves the PTZ in its present state.
Starts the Pre-Defined Tour function when the on-screen PTZ
controller is closed. The Tour that will be activated will be the Tour
that is selected.
Moves to a Selected Preset position when the on-screen PTZ
controller is closed.
PAN / TILT / ZOOM
7–13