Connecting The Ac Adaptor And Connecting To A Computer - Casio IT-3100 User Manual

Connecting the AC Adaptor and Connecting to a Computer

Use the AC adaptor available as an option for the Bridge Satellite Cradle to supply the
power to it. Always make sure that the power is being supplied to the Bridge Satellite
Cradle by the AC adaptor before performing any type of data communication operation
with the Handheld Printer Terminal. The Handheld Printer Terminal draws the power
via the Bridge Satellite Cradle during data communication.
1. After making sure that the Bridge
Satellite Cradle power switch is turned
off, plug the AC adaptor into the AC
adaptor jack on the back.
2. Next, after connecting the power cable
to the AC Adaptor, plug the AC adaptor
into a power outlet.
3. After making sure that the Bridge
Satellite Cradle and your computer are
both turned off, connect the RS-232C
interface or USB interface (after
removing the cap) on the back of the
Bridge Satellite Cradle to your computer
with an RS-232C Cross Cable (DT-
887AXA) or USB Cable (DT-380USB).
Attach the cap always when not using
the port.
Power switch (OFF)
When using the RS-232C port
System Status Indicator Lamp
LINE
Communication Indicator Lamp
DATA
Power indicator Lamp
POWER
Power switch (ON)
Power contacts
E-51