Performing Data Communication; Ir Communication; Rs-232C Communication (It-3100M53E/It-3100M54E Only - Casio IT-3100 User Manual

Performing Data Communication

IR Communication

IR communication can be used to transfer
data between two Handheld Printer
Terminals.
When performing IR communication,
orient the IR ports of both Handheld
Printer Terminals so they are pointing
directly at each other.
Data communication is possible within a
distance of 0 (in direct contact) to 1 m
(max. 20 cm at 4 Mbps).
Important!
• A high-sensitivity communication element is used during IR communication.
• In order to ensure successful communication, avoid using cellular phones or
other devices that emit radio wave in the area where you are performing IR
communication.
• If you need to use such a device, move away from the communicating Handheld
Printer Terminals. In case of a cellular phone, keep it at least 30cm (

RS-232C Communication (IT-3100M53E/IT-3100M54E only)

You can also transfer data directly between
the Handheld Printer Terminal and your
computer. With the power turned off, open
the connector cover (
RS-232C interface connector on the right
side of the Handheld Printer Terminal (
with your computer using the RS-232C
Cross Cable (HA-B80AX).
) and connect the
1
)
2
7 7 7 7 7 ) away.
11 ⁄ ⁄ ⁄ ⁄ ⁄ "
8 8 8 8 8
1
2
E-43