Paper Orientation; Loading Special Media - Hitachi DDS 32 Quick Reference Manual

Paper Orientation

Each tray has an instruction label for loading paper. Refer to this label for correct orientation.

Loading Special Media

For simplex printing:
• Pre-punched paper is loaded with the holes on the right.
• Letterhead is loaded face up and upside down, as shown in the figure below.
• Labels are loaded face up and upside down, as shown in the figure below.
• Striped transparencies are loaded face up with the strip on the left.
For duplex printing
• Pre-punched paper is loaded with the holes on the left.
• Letterhead is loaded face down and upside down, as shown in the figure below.
Note:
When using the product specific Win 3.1, 95, and NT 4.0 drivers, duplex printing on pre-punched
and letterhead paper is possible without having to change the way the paper is loaded by setting
the driver to print on the reverse side of the paper first. Refer to Online Help for further
information.
4
Simplex Printing Orientation
Duplex Printing Orientation
TOP
Quick Reference Guide