Table of Contents
Advertisement
The AP Mode section of the screen expands.
4.
Select a check box for one of the following IP address settings:
•
Get an IP address dynamically from the other router. The other router on the
network assigns an IP address to this router while this router is in AP mode.
•
Fixed IP address (not recommended). Use this setting if you want to manually
assign a specific IP address to this router while it is in AP mode. Using this option
effectively requires advanced network experience.
Note:
To avoid interference, NETGEAR recommends that you use different
wireless settings for the router in access point mode. You could also turn off the
wireless radio on the other router or gateway and use your router only for
wireless client access.
5.
Click the Apply button.
The IP address of the router changes, and you are disconnected. To reconnect, close and
restart your web browser, and type http://www.routerlogin.net.
R6200v2 Smart WiFi Router
Advanced Settings
94
Hide quick links:
Advertisement
Table of Contents
