NETGEAR N300 User Manual page 10

N300 Wireless ADSL2+ Modem Router DGN2200v4
Table 1. Front panel icons for buttons and LEDs (continued)
Icon Description
Internet •
•
•
•
DSL •
•
•
•
WAN Network
•
•
USB •
•
•
LAN (1-4)
•
•
Power •
•
•
•
Solid green. You have an Internet connection. If the connection timed out based
on the setting you entered in the Internet Setup screen, but the DSL connection
is still present, the LED stays green. If the Internet connection is dropped for any
other reason, the LED turns off.
Solid red. The Internet (IP) connection failed. For troubleshooting information,
see Troubleshoot the Internet Connection
Blinking green. Data is being transmitted over the DSL port.
Off. No Internet connection is detected or the device is in bridge mode (an
external device handles the ISP connection).
Solid green. You have a DSL connection. In technical terms, the DSL port is
synchronized with an ISP's network-access device.
Blinking green. The modem router is negotiating the best possible speed on the
DSL line.
Solid red. The DSL connection could not be established.
Off. The unit is off or there is no DSL link established.
Solid green. The modem router obtained a WAN IP address over Ethernet WAN
port 4 and the Internet connection is established.
Off. Ethernet WAN port 4 is not being used as a WAN port, or the ISP has not
yet assigned an IP address over this port.
Solid green. A USB device is connected and ready to use.
Blinking green. A USB device is in use.
Off. No USB device connected, or someone clicked the Safely Remove
Hardware button, or an error has occurred with the device.
Solid green. The LAN port has detected an Ethernet link with a device.
Off. No link is detected on this port.
Solid green. Power is supplied to the modem router.
Solid red. POST (power-on self-test) failed or a device malfunction has
occurred.
Off. Power is not supplied to the modem router.
Blinking. When the Restore Factory Settings button is pressed for 6 seconds
(pressing it briefly resets the unit, the Power LED blinks red three times and then
turns green as the modem router resets to the factory defaults.
Hardware Setup
10
on page 122.