across a COMRESET. Software settings preservation may be enabled or disabled using SET FEATURES with a
subcommand code of 06h. Software settings preservation is enabled by default.
10.15.1 Preserved software settings
If Software setting preservation is enabled, the following settings are preserved across COMRESET. Otherwise
settings are cleared across COMRESET.
Setting
Initialize device parametes
Power Management Feature Set
Standby Timer
Security mode state
Set max ADDRESS EXT
Set feature
Set multiple mode
Contents
Track length
Number of head
Number of cylinder
Capacity
Time to fall into standby mode
Security freeze lock
Security unlock
Capacity
Write Cachi Enable/Disable
Set transfer mode
Advanced Power Management
Enable/Disable
Read Look-Ahead
Reverting to Defaults
Block size
Travelstar 5K100 (Serial ATA) Hard Disk Drive Specification
70