Set Features Commands Support Coverage; Table 124: Set Features Command Coverage - Hitachi HTS541010G9AT00 - Travelstar 100 GB Hard Drive Specifications

Note 2. The WRITE VERIFY command implemented vendor specific. The operation is the same as
WRITE SECTORS and verification is not performed.
Note 3. Protected Area Feature Set
Note 4. Power Management Feature Set
Note 5 . S.M.A.R.T. Function Set
Note 6. Security Mode Feature Set
Note 7. Removable

14.2 SET FEATURES Commands Support Coverage

The following table provides a list of Feature Registers, Feature Names, and implementation for the
HTS5410XXG9SA00. The third column indicates whether or not the HTS5410XXG9SA00 has the
capability of executing the command in comparison to the ATA-6 defined command set. For detailed
operation, refer to section 13.33, "Set Features (EFh)", on page 152.
Table 125: SET FEATURES command coverage
Features
Register
02h Enable write cache
03h Set transfer mode
05h Enable Advanced Power Management
06h Enable Power-Up in Standby feature set
07h Power-Up in Standby device spin-up
10h Enable use of Serial ATA feature
31h Disable Media Status Notification
42h Enable Automatic Acoustic Management
44h Set vendor specific bytes ECC
55h Disable read look-ahead feature
5Dh Enable release interrupt
5Eh Enable SERVICE interrupt
66h Disable reverting to power on defaults
82h Disable write cache
85h Disable Advanced Power Management
86h Disable Power-Up in Standby
90h Disable use of Serial ATA feature
95h Enable Media Status Notification
AAh Enable read look-ahead feature
BBh Set 4 bytes ECC
C2h Disable Automatic Acoustic Management
CCh Enable reverting to power on defaults
DDh Disable release interrupt
DEh Disable SERVICE interrupt
Features Name
Travelstar 5K100 (Serial ATA) Hard Disk Drive Specification
185
Implementation for
Travelstar 5K100
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
No