4.0 Drive characteristics
4.1 Default logical drive parameters
Table 1: Formatted capacity
Physical Layout
Label capacity (GB)
Bytes per sector
Sectors per track
Number of heads
Number of disks
Data sectors per cylinder
Data cylinders per zone
1
Logical layout
Number of heads
Number of Sectors per track
2
Number of Cylinders
Number of sectors
Total logical data bytes
Notes:
Number of cylinders: For drives with capacities greater than 8.45 GB the Identify Device information word 01 limits the number
1.
of cylinders to 16, 383 per the ATA specification.
2.
Logical layout: Logical layout is an imaginary drive parameter (that is, the number of heads) which is used to access the
drive from the system interface. The logical layout to Physical layout (that is, the actual Head and Sectors ) translation is done
automatically in the drive. The default setting can be obtained by issuing an IDENTIFY DEVICE command.
HDS725050KLXXXX
Deskstar 7K500 and Deskstar E7K500 Hard Disk Drive specification
500
512
594-1242
10
5
5940-12420
2000 - 4500
16
63
16,383
976,773,168
500,107,862,016
11