Error Reporting; Table 125. S.m.a.r.t. Error Codes - Hitachi 7K100 - Travelstar - Hard Drive Specifications

Ending LBA for test span 5
Reserved
Vendor specific
Current LBA under test
Current span under test
Feature flags
Vendor Specific
Selective self test pending time 2
Reserved
Data structure checksum

13.39.8 Error reporting

The following table shows the values returned in the Status and Error Registers when specific error conditions are
encountered by a device.
Table 125: S.M.A.R.T. Error Codes
A S.M.A.R.T. FUNCTION SET command was received by the
device without the required key being loaded into the
LBA High and LBA Mid registers.
A S.M.A.R.T. FUNCTION SET command was received by the
device with a subcommand value in the Features Regis-
ter that is either invalid or not supported by this
device.
A S.M.A.R.T. FUNCTION SET command subcommand other
than S.M.A.R.T. ENABLE OPERATIONS was received by the
device while the device was in a "S.M.A.R.T. Disabled"
state.
The device is unable to read its Attribute Values or
Attribute Thresholds data structure
The device is unable to write to its Attribute Values
data structure.
8
256
154
8
2
2
4
1
1
512
Error condition
Travelstar 7K100 Hard Disk Drive Specification
4Ah
52h
152h
1ECh
1F4h
1F6
1F8h
1FCh
1FEh
1FFh
Status Register
180
R/W
Reserved
Vendor specific
Read
Read
R/W
Vendor specific
R/W
Reserved
R/W
Error Register
51h
51h
51h
51h 10h or 40h
51h 10h or 01h
04h
04h
04h