Using the digital electronic programme guide
06
Using the Digital EPG
Using the Digital EPG you can check the
schedule of digital TV programmes, view
information about desired programmes,
and/or select programmes.
GUIDE
1
Press to display the Digital EPG
screen.
The EPG screen updates automatically if the
EPG data is acquired successfully. If not, the
Digital EPG screen shows a blank image.
2
Select a TV programme.
D007
• Press PREV/ NEXT to skip to
the previous/next channel list page.
• Information about the selected
programme appears in the information
1
window.
• To watch a programme currently on air,
select the programme (then press
ENTER).
• You can check information about
programmes scheduled up to one week
ahead, depending on conditions.
• Depending on conditions, it may take
some time to acquire EPG data.
INFO
3
Press to view more information
about the selected programme.
Detailed information appears in the
schedule window.
If the screen contains further information,
More ... is displayed.
Note
1 The general programme list does not show programmes that have already finished.
54
2 For more information on timer programmes, see About timer recordings on page 69.
En
• To quit the display of detailed
information, press INFO again (or
RETURN/EXIT).
D007
************
*************
**************************
GUIDE
4
Press to exit the Digital EPG
screen.
Setting timer programmes
Using the Digital EPG, it's easy to set digital
TV programmes for recording
GUIDE
1
Press to display the Digital EPG
screen.
ENTER
2
Select a programme.
D007
• Select a programme currently on-air:
press ENTER to close the Digital EPG
screen and watch the channel
immediately, or press RED to set the
programme for recording immediately.
• Select a programme not yet started then
press ENTER or RED to set the
programme for recording.
13:40 -
14:05
More...
2
.