Connecting Other Av Sources - Pioneer DVR-560HX-K Operating Instructions Manual

Connections
Important
• The KURO LINK function name used on
the web and in catalogues is referred to
as HDMI Control in the operating
instructions and on the product.
• Depending on the type of Flat Screen TV,
some HDMI input terminals do not
support the HDMI Control function. For
details, see the operating instructions
supplied with your Flat Screen TV.
• To use the following functions, set this
unit's HDMI Control to Off (page 145).
– The timer recording to use VPS/PDC
(page 69).
– When you want this unit to
automatically switch off upon
completion of timer recording. (When
HDMI Control is set to On, this unit
does not automatically switch off if your
Flat Screen TV is switched on upon
completion of timer recording.)
– When using the Video Control function
of an external component.
– Child lock settings (page 70).
– When you connect a SCART cable and
an HDMI cable to the same Flat Screen
TV simultaneously.
• HDMI Control may not operate properly
if you do not use a High Speed HDMI
cable.
• Controls may not function properly in
certain situations, such as immediately
after you have connect an HDMI cable,
turn this unit's power off or remove the
power cable for this unit or the
connected component. If you experience
any problems, set HDMI Control to On
for all connected units, and then display
the pictures stored on this unit on your
Flat Screen TV to improve the situations.
• We cannot guarantee this unit will work
with HDMI control-compatible
components other than those made by
Pioneer.

Connecting other AV sources

Connecting a VCR or analog
camcorder
HDD/DVD
HDD DVD
STANDBY/ON
COMMON INTERFACE
DV IN USB
AUDIO/VIDEO
OUTPUT
(Rear panel)
1
To audio/
Analog camcorder
video input
VCR
1 Connect a set of audio and video
inputs of your VCR or camcorder to a set
of outputs on this recorder.
This enables you to record from this recorder
to your VCR or camcorder.
• You can use standard video or S-Video
cables for the video connection.
• Alternatively, you can use the AV2
(INPUT 1/DECODER) SCART connector
for audio/video input and output with
just one SCART cable.
2 Connect a set of audio and video
outputs of your VCR or camcorder to a
set of inputs on this recorder.
This enables you to record tapes from your
VCR or camcorder.
• You can use standard video or S-Video
cables for the video connection.
• The front panel connections make
convenient connections for a camcorder
input.
• When connecting an external AV source
that only supports monaural sound, only
insert the left (white) audio jack to this
device. Doing so will allow the same
sound track to be recorded to both
channels. You must connect to the
INPUT 2 jack on the front panel.
OPEN/CLOSE
A.TV D.TV HDMI
REC
INPUT 2 S-VIDEO VIDEO L(MONO) R AUDIO
ONE TOUCH
STOP REC
COPY
INPUT
CH A.TV/D.TV
SELECT
AUDIO/VIDEO
INPUT
(Front panel)
2
From audio/
video output
02
23
En