Decoder Box (2); Amplifier/Receiver - Pioneer DVR-560HX-K Operating Instructions Manual

Connections
02
Connecting an external

decoder box (2)

If you only have a decoder, connect it to this
recorder and your TV as shown on this
1
page.
Using the setup on this page you can:
• Record scrambled channels received
using the recorder's built-in analog TV
tuner.
Important
• Do not connect this recorder 'through'
your VCR, satellite receiver or cable box.
Always connect each component
directly to your TV or AV amplifier/
receiver.
Decoder
AUDIO VIDEO
R L
ANTENNA
IN
S-VIDEO
INPUT 3
AV 2 (INPUT 1/DECODER)
OUT
P
Y B P R
AV 1 (RGB) – TV
COMPONENT VIDEO OUT OUTPUT
TV
1 Connect your TV antenna to the
recorder and TV.
See Connecting a TV antenna on page 15 for
details.
Note
1 In order to use this setup, you will need to make the following settings from the Initial Setup menu:
• Set the AV2/L1 In setting to Decoder from the Initial Setup menu (see AV2/L1 In on page 138).
• From the Manual CH Setting screen, set the Decoder setting for the scrambled channels to On (see Manual
20
CH Setting on page 137).
En
From SCART AV
connector
3
AV2 (INPUT 1/
DECODER)
COAXIAL
DIGITAL OUT
HDMI OUT
5 V 30 mA
G-LINK
IN IN OUT
CONTROL
ANTENNA(DIGITAL)
AV1 (RGB) - TV
2
To SCART AV
connector
2 Use a SCART cable (not supplied) to
connect the AV1 (RGB)-TV AV connector
to a SCART AV connector on your TV.
This enables you to watch discs.
3 Use another SCART cable to connect
the AV2 (INPUT 1/DECODER) AV
connector to a SCART AV connector on
your decoder box.
This enables you to record scrambled TV
channels.
Connecting to an AV

amplifier/receiver

To enjoy multichannel surround sound you
need to connect this recorder to an AV
amplifier/receiver using the digital coaxial
output.
In addition to a digital connection, we
recommend also connecting using the
stereo analog connection for compatibility
with all discs and sources.
You'll probably also want to connect a video
output to your AV amplifier/receiver. Use the
ordinary video output (as shown here), or the
S-Video output.
AC IN
Important
• Noise may be output from your speakers
if the recorder is not set up to work with
your AV amplifier/receiver properly (see
Audio Out on page 139).
• When watching D.TV only linear PCM
audio is output from the coaxial digital
out jack.
• Do not connect this recorder to your TV
'through' your VCR using A/V cables.
Always connect it directly to your TV.