Working; On-Screen Displays - Pioneer DVR-560HX-K Operating Instructions Manual

Additional information
19
If the picture freezes and the front panel and remote control
buttons stop working
• Press  (Stop) then try restarting
playback.
• Press the front panel  STANDBY/ON
button to switch the power off, then
switch back on and restart playback. If
the power fails to switch off, press and
hold  STANDBY/ON for five seconds
until the power switches off.

On-screen displays

The table below shows a list of error messages that you may encounter when using the
recorder and an explanation of their meaning.
Message
• Initializing disc. Please wait a
moment.
• Incompatible region number.
• Cannot record any more titles.
• No more space for file management
data.
• This disc cannot be recorded. Undo
the finalization.
• Cannot play this disc.
• This disc cannot be recorded.
• Cannot read the CPRM information.
• Could not record the information to
the disc.
• Cannot edit.
• Could not initialize disc.
• Could not complete finalization
successfully.
• Could not undo finalization
successfully.
• Could not successfully unlock the
disc.
• Incompatible or unreadable disc.
160
En
STANDBY/ON
HDD/DVD
HDD
STANDBY/ON
DV IN USB
Explanation/Action
When you load a blank DVD-RW or DVD+RW disc,
the recorder automatically initializes it.
The disc loaded has an incompatible region
number for the recorder and so will not play.
The disc control data limit has been reached, or
the maximum number of chapters and/or titles has
been reached. Erase titles/chapters or combine
chapters.
The disc was finalized on a non-Pioneer DVD
recorder. Undo the finalization in order to
recording/editing.
The disc may be dirty or damaged. Take out the
disc, clean it and retry. If the error persists, use a
new disc. If the error appears even with a new disc,
please ask your nearest Pioneer-authorized service
center or your dealer to carry out repairs.
The disc loaded is a playback-only disc type. This
display may also appear if the disc is dirty or
damaged.
DVD
COMMON INTERFACE
CH
OPEN/CLOSE
STOP REC
INPUT
SELECT