Related Manuals for Black & Decker Black & Decker Pressure Washer PW1300
Summary of Contents for Black & Decker Black & Decker Pressure Washer PW1300
- Page 1 PW1300 C PW1300 C cod. 90968 - GX...
- Page 2 Lire ce manuel avant l’installation/utilisation du nettoyeur en faisant très attention aux INSTRUCTIONS POUR LA SÉCURITÉ Read this manual through carefully before installing/using the cleaner, paying special attention to the SAFETY INSTRUCTIONS Lesen Sie dieses Handbuch vor der Installation und dem Gebrauch des Hochdruckreinigers aufmerksam durch und achten Sie besonders auf die SICHERHEITSANWEISUNGEN Leggere questo manuale prima dell’installazione/uso dell’idropulitrice, prestando particolare attenzione alle ISTRUZIONI PER LA SICUREZZA...
- Page 4 Ø13...
- Page 6 1 ÷ 25 m 25 ÷ 50 m Volt 2 x 1,5 mm 2 x 2,5 mm S = Switch Z1 = Capacitor suppressor T = Thermal protection M = Motor S1 = Pressure switch...
- Page 7 English SAFETY INSTRUCTIONS 2.2.4 before doing work on the appliance, rEMovE the plug. ccidEntal start up hazard The appliance you have purchased is a technologically advanced 2.2.5 before pressing the trigger, grip the gun firmly to product designed by one of the leading European manufacturers counteract the recoil.
- Page 8 English b2 Lance GENERAL INFORMATION (FIG.1) b3 gun with safety catch Use of the manual b4 power supply cable with plug This manual forms an integral part of the appliance and should be b5 high pressure hose kept for future reference. please read it carefully before installing/ b6 Detergent tank (on models with this feature) using the unit.
- Page 9 English Restarting ADJUSTMENT INFORMATION (FIG.3) 1) Release the safety catch (D). Adjusting the spray nozzle (for models with this feature) 2) Depress the gun trigger and discharge the residual air inside Water flow is adjusted by regulating the nozzle (E). the hoses.
- Page 10 English TROUbLESHOOTING Problem Possible causes Remedy nozzle worn replace nozzle Water filter fouled Clean filter (fig.5) Water supply pressure low Turn on water supply tap fully pump does not reach working Air being sucked into system Check tightness of hose fittings pressure switch off the appliance and keep depressing and releas- ing the gun trigger until the water comes out in a steady...