Preferences > Restart; Rss Support - Tripp Lite SRCOOLNET User Manual

3. Web Console
3.8 Preferences
3.8.4 Preferences > System
Miscellaneous
Figure 3-43: Miscellaneous
The Auto Ack setting allows for alarms that clear to be automatically
removed from the Status-Alarms page. This is enabled by default.
Disabling this feature will require that the alarms be manually
acknowledged on the Status-Alarms page. This setting must be enabled
if utilizing the PowerAlert Network Shutdown Agent.
3.8.5 Preferences > Restart
The restart menu provides the user with an interface to restart the
SNMPWEBCARD.
If there has been a setting that requires a system restart, the message
"Changes have been made that require a restart to take effect" will
be displayed on this menu. This message can only be cleared with a
restart. Changing the settings back to their original values cannot clear
this condition.
A user can reset their PowerAlert (and SNMPWEBCARD) configuration
back to the factory defaults using this menu.
Press [Execute] at the bottom of the page in order for the restart to take
place.
Resets affect the following settings:
Factory Reset Settings
Reset all settings to the original factory defaults except for the
SNMPWEBCARD network settings. Resetting those settings would
potentially disable desired connections to the system. If necessary, the
SNMPWEBCARD network settings can be reset by clearing the Advanced
Settings following a factory reset using the serial CLI boot dialog, which
is accessible as described in the SNMPWEBCARD Installation Manual.
The changes made for this request are:
• Reset NVRAM to hard-coded defaults, resets everything except
o - IPv4 choice of DHCP or Static
- IPv4 saved static Address, IPv4 Subnet Mask, IPv4 Gateway
- IPv6 DHCPv6 Enable / Disable setting
- IPv6 Static Enable / Disable setting
- IPv6 saved Static Address & Prefix Length
- User-configured DNS server.
continued
continued
continued
• Erase the user configuration and system log database
• Reset the Root password back to TrippLite
Reset Users
Reset the default user settings, including clearing any RADIUS settings.
The following are cleared by this option:
• Authorization Settings for authorization and accounting both reset
to LOCAL ONLY
• Removes all RADIUS Server definitions
• Resets the local users to the 5 default users, localadmin,
localmanager, localguest, tripplite, and public
• Reset the Root password back to TrippLite
Figure 3-44: Reset Users

3.9 RSS Support

Dynamic logs are available via RSS feed when web interfaces are
enabled. They are available at http(s)://<ip-address>/logs/<log-type>
where <ip-address> is the ip address of the SNMPWEBCARD and <log-
type> is one of the following:
datalog.txt
datalog.csv
datalog.xml
eventlog.txt
eventlog.csv
eventlog.xml
The format of the log file is indicated in the last 3 characters of the
address.
24