Out-Of-Range Alerts - Cisco 7925G User Manual

Out-of-Range Alerts

Icon
Out-of-Range Alerts
Your system administrator can configure your phone to send you an audible alert (beep) when you are out of
range of the wireless network. When you hear the alert, the
When you are out of range of the wireless network, you cannot use the phone for features requiring a wireless
network connection, such as making and receiving calls.
If your system administrator enabled the out-of-range alert, depending on the configuration, you might hear
a beep only once, or every 10, 30, or 60 seconds until you are back within range of the wireless network.
To reconnect to the wireless network after you hear the alert, move to another location until you see the signal
icon
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
14
Line or call state
BLF indicator is
unavailable for this
line
Remote line in use
Call on hold
Call forward enabled
Authenticated call
Encrypted call
Idle Intercom line
One-way Intercom
call
Two-way Intercom
call
on the phone screen again.
Features of Your Cisco Unified Wireless IP Phone
Description
See Line State (BLF), on page
A shared line is in use remotely. See
page 62.
You have put this call on hold. See
on page 41.
You have forwarded your primary line. See
on page 46.
See Suspicious Call Trace, on page
See Suspicious Call Trace, on page
The intercom line is not in use. See
page 54.
The intercom line is sending or receiving one-way audio.
See Intercom Call, on page
The recipient pressed the intercom line to activate
two-way audio with the caller. See
page 54.
(no signal) icon displays on the phone screen.
65.
Shared Line, on
Hold and Resume,
Call Forward,
67.
67.
Intercom Call, on
54.
Intercom Call, on