Pair Bluetooth Headset With Phone; Connect Bluetooth Headset Already Paired (But Not Connected) With Phone; Unpair Bluetooth Headset From Phone - Cisco 7925G User Manual

Handset, Headset, and Speakerphone

Pair Bluetooth Headset with Phone

Procedure
Step 1
From the Scan Results list, select a Bluetooth headset and press Pair.
Step 2
When prompted, enter the Bluetooth Passkey, and then press
Note
If the pairing succeeds, the newly paired headset is added to the Device List and becomes connected to the
phone (if no prior Bluetooth connection exists between another device and the phone).
Step 3 If a prior connection exists, first unpair or disconnect the other device from the phone.
The Bluetooth Device Connected icon
Step 4 If the pairing fails, press Back to retry.
Related Topics
Unpair Bluetooth Headset from Phone, on page 111

Connect Bluetooth Headset Already Paired (but Not Connected) with Phone

Procedure
Perform one of the following actions:
• Tap on the headset to send a connection request to the phone.
•

Unpair Bluetooth Headset from Phone

Procedure
Step 1
Choose
Step 2 Select a headset from the list, press Options > Unpair.
Step 3 Press Yes to confirm.
The headset disconnects from the phone and is removed from the Device List.
Obtain the Bluetooth Passkey from your Bluetooth device documentation. Pairing must be completed
within 1 minute or it fails.
Choose > Phone Settings > Bluetooth > Device List, highlight the headset, and press Options
> Connect.
> Phone Settings > Bluetooth > Device List.
displays, and a check mark appears next to the device name.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
Pair Bluetooth Headset with Phone
(Select) or Options > OK.
111