Chapter 5 Voice Messages; Set Up And Personalize Voicemail Service - Cisco 7925G User Manual

Voice messages
You can use your Cisco Unified Wireless IP Phone to access a voicemail service.
Your company determines the voicemail service that your phone system uses. For the most accurate and
Note
detailed information, refer to the documentation that came with your voicemail service.
When you have a voice message, you see the following indications:
• Red blinking light
• Text message You Have VoiceMail
• Flashing message waiting
For information about the commands that your voicemail service supports, see the voicemail service user
documentation.
This chapter contains the following sections:
•
•
•

Set Up and Personalize Voicemail Service

Procedure
Step 1
Press Message or press and hold
Step 2 Follow the voice instructions.
If you changed the left softkey on the main screen to access the Phone Book (Ph Book), the Message softkey
is not available.
Set Up and Personalize Voicemail Service, page 87
Listen to Voicemail or Access the Voicemail System Menu, page 88
Send Call to Voicemail System, page 88
C H A P T E R
icon next to your directory number in Line View.
.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
5
87