Table of Contents
Advertisement
Associated Clients (5): Click 'Show Active Clients' button, then an "Active
Root AP SSID (6):
Site Survey (7):
After you finish the wireless settings, please click 'Apply' button, after you
click 'Apply', the following message will be displayed on your web browser:
Please click 'Continue' to return to the previous setup menu and continue with
router setup, or click 'Apply' to reboot the router so that settings take effect
(Please wait about 40 seconds for router to reboot).
8.2 Advanced Wireless Settings
This router provides some advanced control of wireless parameters; if you
want to configure these settings, please click '2.4GHz Wireless' or '5GHz
Wireless' menu on the left of web management interface, then click 'Advanced
Wireless Client Table" will pop up. You can see the status
of all active wireless stations connected to the access
point.
In 'Universal Repeater' mode, this device can act as a
station and connect to a Root AP. You should assign the
SSID of the Root AP here or click the 'Select Site Survey'
button to choose a Root AP.
Click 'Select Site Survey' button, then a "Wireless Site
Survey Table" will pop up. It will list all available access
points nearby. You can select an access point from the
table and have the X650 join wireless LAN through this
access point.
84
Advertisement
Table of Contents
