Table of Contents
Advertisement
Advanced
Settings (5):
After you finish with all settings, please click 'Apply' (6) button and the
following message will be displayed on your web browser:
Please click 'Continue' to return to the previous setup menu and continue with
other setup procedures, or click 'Apply' to reboot the router so the settings will
take effect (Please wait about 40 seconds for router to reboot).
If you want to reset all settings on this page back to their previously-saved
values, please click the 'Cancel' button.
9.3.3.1 DoS ‐ Advanced Settings
When you click the 'Advanced Settings' button in the DoS menu, the
following message will be displayed on your web browser:
traffic.
Click this button and you can set the advanced
settings of the DoS prevention method listed above
(please see section 9.3.3.1 'DoS – Advanced Settings'
below).
125
Advertisement
Table of Contents
