Table of Contents
Advertisement
Here are descriptions of each setup item:
Enable Port
Forwarding (1):
Private IP (2):
Computer Name (3): Pull down the menu and all the computers connected to
Type (4):
Port Range (5):
Comment (6):
Add (7):
Reset (8):
Port Forwarding
Table (9):
Delete (10):
Delete All (11):
Check this box to enable port mapping,
and uncheck this box to disable port mapping.
Input the IP address of the computer on local network
that provides internet service.
the X650 will be listed here. You can easily select the
computer name without checking the IP address of the
computer.
Select the type of connection, TCP or UDP. If you are not
sure, please select 'Both'.
Input the starting port number in the left field, and input
the ending port number in the right field. If you only want
to redirect a single port number, simply place the port
number in the left field.
Please input any text to describe this mapping, up to 16
alphanumerical characters.
Add the mapping to port forwarding table.
Remove all inputted values.
All existing port forwarding mappings will
be displayed here.
Please select a type of port forwarding mapping by
clicking the 'Select' box of the mapping, then click
'Delete Selected' button to remove the mapping. If there
is no existing mapping, this button will be grayed out.
Delete all mappings in virtual server table.
107
Advertisement
Table of Contents
