Table of Contents
Advertisement
Installation Guide for the 9 dBi Omni-directional Antenna ANT2409
Now, Connect the Antenna
The instructions below cover outdoor and indoor installations.
Connecting the Antenna for and Outdoor Installation
1. Turn off your wireless unit.
2. In the procedure "Pole Mounting Configuration" on page 1-3, the antenna
should have been assembled for outdoor installation using the provided 2-
meter cable. Connect the other side of the cable to the lighting arrestor as
shown here. You can connect the cable to either of the two RF ports on the
lightning arrestor.
Figure 2-5
2-4
v1.0, April 2008
Advertisement
Table of Contents
