Table of Contents
Advertisement
Installation Guide for the 9 dBi Omni-directional Antenna ANT2409
2. Securely attach the antenna cable. Make sure to use the correct cable.
•
•
3. Mount the antenna as shown in the following illustrations. The antenna can be
pole mounted, wall mounted, or flat-surface mounted.
Figure 2-2
Figure 2-3
2-2
Outdoors. Use the provided 2m antenna cable to connect to the lightning
arrestor. A seperate antenna must be purchased to connect the antenna to
the access point.
Indoors. Use the provided N/SMA adapter with a NETGEAR cable
model ACC-10314-01, 02, 03, 04 or 05 (sold separately) to connect the
antenna to the access point. Do not use the provided 2m cable, which is
only for connecting to lightning arrestor in outdoor installation.
v1.0, April 2008
Advertisement
Table of Contents
