Low-Cut Filter Setting (Lcf); Power Save Setting (Power Save); Setting The Battery Type (Battery Type); Displaying The Accumulated Use Time (Time) - Sony DWTB01/E1424 Operating Instructions Manual

Low-cut filter setting
The frequency of the low-cut filter can be
set.
OFF: Turns off the low-cut filter.
20 30 40 50 60 70 80 90 100
120 140 160 180 200 220 (Hz):
Low-cut filter is set according to the
selected frequency.
Using wireless remote control, this function
can be controlled from the receiver and
other devices.
For details on wireless remote control function, see
"Using the Cross Remote" on page 12.
Power save setting
SAVE)
To conserve power, this setting allows you
to put all transmitter functions to sleep.
ACTIVE: The transmitter operates
normally.
SLEEP: The sleep function is on. During
sleep, the POWER indicator flashes at 2-
second intervals.
To change back to normal
operation
During sleep, press the SET, +, or – button.
You can also use the wireless remote
control to change the receiver back to
normal operation.
For details on wireless remote control function, see
"Using the Cross Remote" on page 12.
20 Setting Menus
Setting the battery type
(LCF)
(BATTERY TYPE)
Set this item according to the type of
batteries you use to obtain accurate battery
power status indication.
TYPE1: The power status is indicated
based on characteristics of new LR6 (size
AA) Sony Alkaline batteries. Select this for
LR6 (size AA) alkaline batteries.
TYPE2: Select this for rechargeable
nickel-metal-hydride batteries.
TYPE3: Select this for lithium batteries.
Note
The characteristics of batteries change
according to battery type and
environmental conditions. It is
(POWER
recommended that you learn the
characteristics of batteries you use before
using them.
Displaying the
accumulated use time
You can display the accumulated battery
use time as a rough estimate of total
transmitter usage.
The factory setting is "00:00".
To reset the accumulated time
indication
1
2
Using wireless remote control, this function
can be controlled from the receiver and
other devices.
For details on wireless remote control function, see
"Using the Cross Remote" on page 12.
Hold down the SET button until the
time indication flashes.
Press the – button so "00:00 RESET"
appears, and then press the SET
button.
(TIME)