Advertisement
Starting with the WAN port, on the left in the picture below, connect
the Cable or DSL modem to the gateway using an Ethernet cable.
Next, connect the PC or switch to the LAN port. Finally, connect your
regular telephone(s) directly into either of the two Phone ports using
RJ-11 phone cable. (Connect the Line port to a standard telephone
wall outlet for PSTN Life Line function)
Configuring the VoIP Gateway using a Web Browser
Setting Up a Connection
In order to use a web browser to configure the VoIP gateway, you
must be sure it has a valid Ethernet connection from the PC to the
LAN port.
The VoIP gateway comes with a default IP address of 10.1.10.4.
Make sure the PC is in the same IP range as the VoIP gateway. You can do this by
changing the IP address of the PC as shown.
Go to Start>Settings>Control Panel>Double Click on Network Neighborhood
-2-
Advertisement
