Side-Views Of The Base; Default Settings (Set In The Factory) - AEG Milano 20 User Manual

Side-views of the base

C
A. Basic appliance
B. Handset
C. Sliding switch for setting the ringer volume (off, low, middle, high)
D. Handset cable inlet at the base
E. Sliding switch for setting the flash-time (100 or 300 ms)
F. Sliding switch for setting the dialing mode (P= impulse /T=tone)
G. Inlet for the telephone cord
H. Handset cable inlet at the handset

Default settings (set in the factory)

Dialing mode
Flash – time
Pause
Redial memory
Ringer volume
4
F E
G
tone dialing
300 or 100 ms (depending on your country's version)
3 seconds
empty
high
AEG Milano 20_en