Interface Module - Cisco MDS 9216 Hardware Installation Manual

Interface Module

Send documentation comments to mdsfeedback-doc@cisco.com.
Interface Module
Cisco MDS 9216 Switch Hardware Installation Guide
1-8
The interface module, which is located above slot 1 (see
following local and remote management interfaces:
RS-232 (EIA/TIA-232) console port with an RJ-45 connection that you can
•
use to:
Configure the switch from the CLI
–
– Monitor network statistics and errors
Configure SNMP agent parameters
–
MGMT 10/100 Ethernet port with an RJ-45 connection that provides network
•
management capabilities.
RS-232 COM1 port with a DB-9 connector, which can be attached to a
•
modem.
Figure 1-4 Interface Module for the Cisco MDS 9216 Switch
MDS 9216
1 ESD socket (for ESD strap)
2 Grounding pad (beneath tape)
3 Status and System LEDs
4 Reset button
Chapter 1
Figure
1 3
5
6
CONSOLE MGMT 10/100
2 4
5 Console port
6 MGMT 10/100 Ethernet port (with
integrated Link and Activity LEDs)
7 COM1 port
8 Asset tag
9 Interface module
Product Overview
1-4), provides the
7 8
COM1
9
78-16165-01