Changing And Setting The Menu Parameters - KitchenAid KSCX 3610 Instructions For Use Manual

501974402003_UK 8-10-2007

12 Changing and setting the menu parameters

The following menu parameters and functions can be changed by the user:
• Clock
• Auto-start time
• Descaling process
• Coffee temperature
• Length of time the appliance remains on
• Water hardness Factory default values
12.1 Setting the clock
To set the clock, proceed as follows:
• Press the
appliance displays
• Press the
rapidly).
• Press the button to confirm the value;
• Press the
When the appliance is in stand-by, you can see the hour by pressing any one of the buttons (except
the ON/OFF button).
12.2 Setting auto-start time
This enables you to set automatic start times.
• Make sure the clock on the appliance is set as described above.
• Press the
• Press the
changed rapidly).
• Press the button to confirm the value,
• Press once and the appliance displays the message:
Press the
• Press the button to activate auto-start;
• Press the
12.3 Descaling
Over time, the continuous heating up of the water used to make the coffee leads to lime scale building up
in the inner circuits of the appliance.
When the appliance displays the message:
you should perform the descale cycle.
Proceed as follows:
• make sure the appliance is ready.
• press the
until the appliance displays:
• Press and the appliance displays the message:
• Press the button to start the descale programme.
13:48 Pagina 20
(the light over the button comes on) then press the
CLOCK 00:00
button to set the clock. (If you hold the
button to exit programming mode or
button then press the
START TIME 00:00
button to set the auto-start time. (If you hold the
AUTO-START NO
button to modify the function (the appliance displays AUTO-START YES);
button to exit programming mode or the
button (the light over the button comes on) then press the
DESCALE YES
, button down, the time is changed
to change other parameters.
button repeatedly until the appliance displays:
button to change other parameters.
DESCALE
DESCALE NO
20
button repeatedly until the
, button down, the time is
button repeatedly