Changing The Quantity Of Coffee In The Cup; Regulating The Coffee Mill - KitchenAid KSCX 3610 Instructions For Use Manual

501974402003_UK 8-10-2007

6 Changing the quantity of coffee in the cup

The appliance is factory preset to automatically deliver the following quantities of coffee:
- short (when the
- standard (when the
- long (when the
To change these quantities, proceed as follows:
- press the button corresponding to the quantity you want to change (
seconds until the message "PROGRAM QUANTITY" is displayed;
- when the coffee in the cup reaches the required level, press the same button again to memorise the
new amount.

7 Regulating the coffee mill

However, after making the first few coffees, if you find that coffee delivery is either too fast or too slow (in
drips), the grinding coarseness regulator can be adjusted (fig. 10).
Turning it 1 click (1 number) clockwise speeds up coffee delivery (without drips).
Turning it 1 click anticlockwise slows down delivery giving a creamier appearance to the coffee.
These adjustments will only be evident after at least 2 cups of coffee have been run off.
The grinding coarseness regulator must only be turned when the coffee mill is on.
Turn anticlockwise to obtain finer ground coffee, slower delivery and a creamier
appearance.
Turn clockwise for coarser ground coffee and faster delivery (not a drop at a time).
(Coffee has been used to factory test the appliance and it is therefore completely normal for there to be
traces of coffee in the mill. This appliance is however guaranteed to be new).
13:47 Pagina 15
button is pressed);
button is pressed);
button is pressed);
,
15
or ) for at least 8