Meaning Of Messages And What To Do - KitchenAid KSCX 3610 Instructions For Use Manual

501974402003_UK 8-10-2007

14 Meaning of messages and what to do

MESSAGE
FILL TANK
GROUND TOO FINE
ADJUST MILL AND
PRESS THE OK BUTTON
EMPTY GROUNDS CONTAINER
INSERT GROUNDS CONTAINER
ADD PRE-GROUND COFFEE
FILL BEAN CONTAINER
DESCALE
PRESS NEXT+ CHANGE
CLOSE DOOR
INSERT INFUSER
GENERAL ALARM
13:48 Pagina 23
MEANING
• The water tank is empty or is
positioned incorrectly.
• The tank is dirty or encrusted
with lime scale.
• The appliance cannot make
coffee.
• The coffee runs off too slowly.
• The grounds container is full.
• After cleaning, the grounds
container has not been
replaced.
• With the ground coffee
function selected, ground
coffee has not been poured
into the funnel.
• The coffee beans have run out.
• If the coffee grinder is very
noisy, this means a small stone
in the coffee beans has blocked
the mill.
• This indicates the presence of
lime scale in the appliance.
• After cleaning, the infuser has
probably been left out of the
coffee maker.
• The service door is open.
• After cleaning, the infuser has
probably been left out of the
coffee maker.
• The inside of the appliance is
very dirty.
23
WHAT TO DO
• Fill the water tank as described
in chapter 5, note 6 and insert
it fully.
• Rinse or descale the tank.
• Press the OK button (fig. 17).
• Turn the grinding regulator (fig.
10) one click clockwise (see
chapter 7).
• Empty the grounds container
and clean as described in
chapter 5, note 7, then
replace.
• Open the service door and
insert the grounds container.
• Add the ground coffee as
described in chapter 8.
• Fill bean container.
• Contact an authorised service
centre.
• The descaling procedure,
described in chapter 12.3,
needs to be performed as
soon as possible.
• Leave the service door closed
and the infuser out of the
appliance, then follow the
instructions displayed.
• If the service door cannot be
closed, check that the infuser
is inserted correctly (chapter
11.2 - note 1).
• Insert the infuser, see chapter
11.2.
• Thoroughly clean the inside of
the appliance, as described in
chapter 11.2. If the message is
still displayed after cleaning,
contact a service centre.