The image scanner won't read your bar code at all.
1. Scan the sample bar codes in the back of this manual. If the image scanner
reads the sample bar codes, check that your bar code is readable.
Verify that your bar code symbology is enabled (see
2. If the image scanner still can't read the sample bar codes, scan
Symbologies
If you aren't sure what programming options have been set in the base, or if you
want the factory default settings restored, scan
Default Settings: Current Application Work Group
Troubleshooting the Cordless System
The image scanner must be linked to the base for the system to work properly.
See "Linking Image Scanner to Base" on page
12 - 4
on page 6-1.
Chapter
Resetting the Standard Product
on page 10-4.
1-5.
6).
All