Connecting To The Auxiliary Port - Cisco ASR 903 Installation Manual

Connecting the Cisco ASR 903 Router to the Network
Run the setup.exe for Windows 32-bit or setup(x64).exe for Windows-64bit. Click Next.
Step 1
The InstallShield Wizard for Cisco Virtual Com appears. Click Next.
Step 2
When the Program Maintenance window appears, select the Remove radio button. Click Next.
Step 3
When the Remove the Program window appears, click Remove.
Step 4
When the InstallShield Wizard Completed window appears click Finish.
Step 5
Uninstalling the Cisco Microsoft Windows Vista USB Driver
This procedure shows you how to uninstall the Microsoft Windows Vista USB driver.
Note
Run the setup.exe for Windows 32-bit or setup(x64).exe for Windows-64bit. Click Next.
Step 1
The InstallShield Wizard for Cisco Virtual Com appears. Click Next.
Step 2
When the Program Maintenance window appears, select the Remove radio button. Click Next.
Step 3
When the Remove the Program window appears, click Remove.
Step 4
Note
When the InstallShield Wizard Completed window appears click Finish.
Step 5

Connecting to the Auxiliary Port

When a modem is connected to the auxiliary port, a remote user can dial in to the router and configure
it. Use a light blue console cable and the DB-9-to-DB-25 connector adapter.
Note
Cisco ASR 903 Router Hardware Installation Guide
3-36
Disconnect the router console terminal before uninstalling the driver.
If a User Account Control warning appears, click "Allow - I trust this program..." to proceed.
The console cable and DB-9-to-DB-25 connector are not included with the
Cisco ASR 903 Router; they are ordered separately.
Chapter 3 Installing the Cisco ASR 903 Router
OL-25178-03