1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. ASR 901S Series
  6. Installation manual

Cisco ASR 901S Series Installation Manual

Hide thumbs Also See for ASR 901S Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Cisco ASR 901S Series Aggregation Services Router Hardware

Installation Guide

First Published: May 13, 2013
Last Modified: December 18, 2013
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-29732-01

Advertisement

Table of Contents
loading

Related Manuals for Cisco ASR 901S Series

Summary of Contents for Cisco ASR 901S Series

  • Page 1: Installation Guide

    Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide First Published: May 13, 2013 Last Modified: December 18, 2013 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387)
  • Page 2 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.

  • Page 3: Table Of Contents

    C H A P T E R 1 Hardware Description Cisco ASR 901S Series Aggregation Services Router: Front View Cisco ASR 901S Series Aggregation Services Router: Back View Cisco ASR 901S Series Aggregation Services Router: Top and Bottom View External Interfaces Internal Interfaces Safety Precautions...
  • Page 4 AC Power Cable Connecting the AC Power Cable to the Router Connecting Cables Using Cable Glands Installing Cable Glands Connecting the Console Port Connecting Network Cables Connecting Gigabit Ethernet Interface Cables Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 5 SFP and SFP Port Pinouts and Cable Specifications Console Port Signals and Pinouts Connecting Console Port and Pinouts Identifying a Rollover Cable Alarm Port Pinouts Management Ethernet Port Pinouts Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 6 Contents Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 7 Preface This section describes the objectives, audience, organization, and conventions of this document—Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide. • Audience, page vii • Organization, page vii • Conventions, page viii • Related Documentation, page x •...

  • Page 8: Preface

    Default responses to system prompts are in square brackets. !, # An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide viii OL-29732-01...
  • Page 9 Default responses to system prompts are in square brackets. !, # An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 10: Related Documentation

    Subscribe to What's New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.

  • Page 11: Introduction

    These routers provide carrier class metro Ethernet access connectivity in small cell areas and support packet-based synchronization based on IEEE1588 and synchronous Ethernet. The ASR 901S Series Aggregation Services Router is compact and can be easily deployed in challenging locations such as lamp posts, telephone poles, and side walls.

  • Page 12: Cisco Asr 901S Series Aggregation Services Router: Front View

    • IP-65 and Type 4X compliant, sealed enclosure designed for outdoor deployment • Mechanical mounting options to enable mounting on side walls, lamp posts, and telephone poles. The Cisco ASR 901S Series Aggregation Services Router has the following operational views: Cisco ASR 901S Series Aggregation Services Router: Front View The Cisco ASR 901S Series Aggregation Services Router has a single detachable cover.

  • Page 13: Cisco Asr 901S Series Aggregation Services Router Hardware Installation Guide

    Introduction Cisco ASR 901S Series Aggregation Services Router: Front View The following figure illustrates the front view of the router. Figure 1: Cisco ASR 901S Series Aggregation Services Router Front View Detachable router cover Upper Section This section houses the electrical circuitry of the router.

  • Page 14: Cisco Asr 901S Series Aggregation Services Router Hardware Installation Guide

    The following figures shows the open view of the cable bay of the FD and FA router chassis models. Figure 2: Cable Bay of the FD Chassis Only the FD chassis model is supported in this release. Note Figure 3: Cable Bay of the FA Chassis Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 15: Cisco Asr 901S Series Aggregation Services Router: Back View

    Heat sink fins Cisco ASR 901S Series Aggregation Services Router: Top and Bottom View At the top of the Cisco ASR 901S Series Aggregation Services Router is an antenna connector and a handle that is used to carry or remove the router.
  • Page 16 This dust cap protects the router interior from environmental elements like water, heat, cold, and dust. The following figure shows the top view of the router. Figure 5: Cisco ASR 901S Series Aggregation Services Router — Top View Antenna (connected) Router handle...

  • Page 17: External Interfaces

    Cisco ASR 901S Series Aggregation Services Router: Top and Bottom View External Interfaces The external interfaces provided on the bottom panel of the Cisco ASR 901S Series Aggregation Services Router are: • LEDs—There are three LEDs supported on the router, which are located on the faceplate on the bottom panel of the router: System, Management, and Network.

  • Page 18: Cisco Asr 901S Series Aggregation Services Router Hardware Installation Guide

    DC input voltages specifically available at cell sites. A four-pin DC connector is provided on the router faceplate as shown in the following figure. Figure 6: Cisco ASR 901S Series Aggregation Services Router — Bottom View (A901S-4SG-F-D) LEDs DC power input (four-pin)

  • Page 19: Cisco Asr 901S Series Aggregation Services Router Hardware Installation Guide

    For details about the power specifications, see Table 9: Power Specifications, on page The following table provides the list of interface ports supported on Cisco ASR 901S Series Aggregation Services Router. Table 3: Interface Ports Supported on the Cisco ASR 901S Series Aggregation Services Router...

  • Page 20: Internal Interfaces

    Management port Safety Precautions Observe the following general safety precautions and recommendations in planning the source power requirements for the Cisco ASR 901S Series Aggregation Services Router (for additional safety information, Safety Guidelines, on page 15). Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide...

  • Page 21: Environmental Monitoring Temperature Sensor

    LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021 Environmental Monitoring Temperature Sensor The Cisco ASR 901S Series Aggregation Services Router has three temperature sensors on board to detect over temperature conditions inside the chassis.

  • Page 22: External Connections And Chassis Cable Ports

    • Each SFP port can be connected with an LC-LC patch cable from the SFP module to the faceplate. For external connectivity, an LC cable system a with IP-65 sealing should be used. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 23: Cisco Asr 901S Series Aggregation Services Router Hardware Installation Guide

    Note In certain configurations, like four SFPs, two Cus, and alarm, it is not possible to route the console and management ports through the three-wire cable gland. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 24: Cisco Asr 901S Series Aggregation Services Router Hardware Installation Guide

    Introduction External Connections and Chassis Cable Ports Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 25: Preparing To Install The Router

    C H A P T E R Preparing to Install the Router This chapter guides you through the process of preparing for your Cisco ASR 901S Series Aggregation Services Router installation. It contains safety information and warnings, site preparation details and instructions on unpacking the router.

  • Page 26: Safety With Electricity

    ◦ Performing most hardware upgrades. • Never install equipment that appears damaged. • Carefully examine your work area for possible hazards, such as wet floors, ungrounded power extension cables, and missing safety grounds. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 27: Preventing Electrostatic Discharge Damage

    This section contains important safety warnings for the installation and use of the router. Translated versions of all safety warnings are available in the safety warnings document that is available on Cisco.com. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 28: Prerequisites

    Ideally, you should have prepared the installation site beforehand. As part of your preparation, obtain a plan of the site and the exact location where the Cisco ASR 901S Series Aggregation Services Router would be housed. Determine the location of any existing routers and their interconnections, including communications and power.

  • Page 29: Site Environment

    • Determine power requirements. • Identify required procedures or tests. • Make a preliminary plan that locates each Cisco ASR 901S Series Aggregation Services Router that you plan to install. • Verify the list of replaceable parts for installation (screws, bolts, washers, and so on).

  • Page 30: Unpacking The Router

    Return all packing material to the shipping container, and save it. Note Do not discard the packaging materials used in shipping your Cisco ASR 901S Series Aggregation Services Router. You will need the packaging materials in the future if you move or ship the router.

  • Page 31: Installation Checklist

    Cisco Information Packet publication Inspect all items for shipping damage. If an item appears to be damaged, or if you encounter problems installing or configuring your router, contact customer service. The Cisco Information Packet provides warranty, service, and support information. Installation Checklist To assist you with your installation and to provide a historical record of completed tasks and users, use the following installation checklist.
  • Page 32 Installation Checklist Initial electrical connections established ASCII terminal (for local configuration) or modem (for remote configuration) Signal distance limits verified Start-up sequence steps completed Initial operation verified Software image verified Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 33: Installing The Router

    C H A P T E R Installing the Router This chapter describes the safety information, equipment, and procedures required to mount the Cisco ASR 901S Series Aggregation Services Router onto a vertical pole or wall. This chapter contains these sections: •...

  • Page 34: General Safety Information For Mounting

    (PID) A901S-MNT-WALL= Wall Mount Kit, This kit is required if your installation requires a Cisco mounting on page 27 bracket to mount the router. This kit is included with the router accessory kit, and is used with the wall mount and pole mount kit and includes the hardware required to attach the mounting bracket onto a wall or pole clamp bracket.

  • Page 35: Contents Of The Mounting Kits

    This section describes the contents of the mounting kits available for the router and when you should use each kit. Pole Mount Kit Use the Cisco pole mount kit to install the pole clamp bracket onto any pole or streetlight. The kit supports poles that meet the following criteria: • Size: 2 to 16 inch diameter poles...
  • Page 36 Figure 9: Pole Mount Kit Contents Item Name Qty. Description Pole clamp bracket Install pole clamp bracket onto a pole. The wall mount bracket is attached to the pole clamp. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 37: Wall Mount Kit

    Wall Mount Kit Use the wall mount bracket kit if you require a Cisco mounting bracket. The wall mount bracket is attached to a wall or to the pole clamp bracket assembly and then the router is installed onto the wall mount bracket.
  • Page 38 Figure 10: Wall Mount Bracket Kit Contents Item Name Qty. Description Wall mount Mounts onto a wall or to a pole clamp bracket assembly (which is bracket installed on a pole). Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 39: Band Straps

    Use the tool in the Strap Tool Kit to attach the steel straps included in the Band Straps, on page 29. Steel straps are required to install the mounting plate on poles larger than 4.5 inches (11.4 cm) in diameter. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 40: Customer-Supplied Materials And Tools

    Mounting the Router onto a Wall, on page 41 Phillips screwdriver, or other screwdriver for Grounding the Router, on page 45 cross-recessed screws Crimping tool or pliers Grounding the Router, on page 45 Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 41: Router-Mounting Instructions

    The pole mount kit contains several parts that you must assemble prior to mounting onto a pole. First you need to assemble two pole clamp gussets on the pole clamp bracket that are positioned for the pole diameter Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 42 Figure 13: Pole Clamp Bracket Adjustment Hole Locations Pole size indicators Bolt holes for pole diameters (11 to 16 inches indicated) • 2 to 6 in. • 6 to 11 in. • 11 to 16 in. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 43 Figure 14: Assembling the Pole Clamp Gusset onto the Pole Clamp Bracket M8 x 12 screw (with M8 spring washer) Pole clamp gusset M8 spring washer Pole clamp bracket Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 44: Mounting The Router Onto A Pole

    This process requires extra tools and material not provided in the pole mount kit. Materials Required • Two 0.75-in. (1.9 cm) stainless steel bands (Cisco Band Strap Kit) • Banding strap tool (BAND IT) (Cisco AIR-BAND-INST-TL=) • Ground lug (provided with router) •...
  • Page 45 For pole diameters of 3.5 in. (8.9 cm) or less, mount the pole clamp bracket assembly to a pole using two metal straps looped through the space between the pole clamp bracket and the pole clamp gussets (see the Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 46 Do not place the metal straps in the large open area between the pole clamp bracket and the pole Caution clamp gussets because this does not properly secure the router. Step 4 Position the pole clamp bracket on the pole as needed before tightening the metal bands. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 47 Install eight M8 x12 screws (with M8 spring washers) into the bolt holes. Figure 17: Fixing the Mounting Bracket onto the Pole Clamp Bracket Assembly M8 x 12 screws M8 spring washers Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 48 The router should be positioned with the LEDs on the bottom to allow viewing from the ground. Note Figure 18: Mounting the Router onto the Mounting Bracket on the Pole M8 x 12 screws Pole M8 spring washers Metal straps Mounting bracket — Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 49 Step 13 Ensure that the front of the router is vertical, and tighten the four screws to 13 to 15 ft lbs (17.6 to 20.3 Nm). Step 14 (Optional) When using the optional Cisco external omnidirectional antenna, connect it to the router.

  • Page 50: Router Orientation When Mounting Router On A Wall

    The router should be mounted at a height at which you are able to view the top of the module-side panel and at which the cables are able to be managed without adding stress to the router ports. Wall-Mount Hardware Distance Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 51: Mounting The Router Onto A Wall

    Materials Required • Ground lug and screws (provided with the router) • Crimping tool for ground lug, Panduit (http://onlinecatalog.panduit.com) • Eight M8 or 5/16 in. screws Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 52 24.47 lbs. (11.1 kgs [assembled FA chassis with top cover including two SFPs, antenna, and power supply unit, and mounting bracket with attaching screws]) static weight. Figure 21: Wall Mount Bracket for Wall-Mounting Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 53 (see the following figure). Figure 22: Mounting the Router onto the Wall Mount Bracket on the Wall M8 x 12 screws Wall mount bracket M8 spring washers — Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 54 Step 6 (Optional) When using the optional Cisco external omnidirectional antenna, connect it to the router point as shown in the above figure. Hand-tighten the antenna to the router. When the antenna is not installed on the router, it is mandatory to install the antenna dust cap that is Note shipped with the router.

  • Page 55: Connecting The Chassis Ground And Power

    Connecting the Chassis Ground and Power Connecting the Chassis Ground and Power Before you connect power or turn on power to the Cisco ASR 901S Series Aggregation Services Router, you must provide an adequate chassis ground (earth) connection to your router.
  • Page 56 Installing the Router Grounding the Router The following figure shows the grounding point marked on the right side of the Cisco ASR 901S Series Aggregation Services Router for ease of installation. Figure 24: Grounding Point on the Router Grounding point lug cable This unit is installed outdoors and must be permanently grounded to a minimum 6-AWG copper ground wire.
  • Page 57 Connect the other end of the ground wire to a suitable grounding point at your site. Step 8 Repeat steps 3 to 7 to attach the cable to the ground lug on the left side of the router. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 58: Opening The Router Chassis

    Opening the Router Chassis This section describes how to open the Cisco ASR 901S Series Aggregation Services Router cover. To access the router, you must open the router cover to access the cable bay area to install or change cables, optical modules, and so on.
  • Page 59 This seal creates pressure, which can cause the cover to open suddenly when the last screw is loosened. Materials Required Special screw driver (available as part of the accessories/install kit) Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 60 After all twelve screws are loose, remove the cover. The router door is held by a cable that is affixed to the cable bay inside the chassis as shown in the following figure. Figure 29: View of Wall-Mounted Router With Open Cover Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 61: Closing The Router Cover

    When closing the router cover, alternate tightening bolts on each side of the chassis, in the order shown in Opening the Router Cover, on page 48, to evenly seal the cover. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 62: Power Connection Compliance

    To assemble and connect a DC power cable, you need to supply these tools and material: • 3 core outdoor-rated DC power cable (minimum 16 AWG) with outside cable diameter of 0.20 to 0.45 inch (0.51 to 1.14 cm). Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 63 The grounding architecture of this product is DC-isolated (DC-I) for DC-powered products. DC-powered Caution products have a nominal operating DC voltage of 24V and -48 VDC. Minimal steady state DC operating voltage is 24 VDC. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 64 Step 6 Connect the DC power connector to the DC input plug on the faceplate of the router. To power on the router, Powering on the Router, on page Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 65: Ac Power Cable

    AC Power Cable AC Power Cable The router supports the Cisco AC power cable that needs to be ordered separately. One end of the cable has the router AC power connector; the other end is attached to an AC power plug.

  • Page 66: Connecting The Ac Power Cable To The Router

    No. 1, or UL 1449. Suitability of the components for the application must be determined for the intended installation. (For example, some devices are suitable for installation on the load side of the service entrance only, and some are suitable for use with cord-connected equipment only.) Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 67: Connecting Cables

    Turn on AC power at the designated circuits. The router will power on and boot the software image. Connecting Cables This section describes how to connect the Cisco ASR 901S Series Aggregation Services Router to external devices and networks. Follow the procedures in this section based on your network configuration and requirements.

  • Page 68: Using Cable Glands

    Secures the split gasket over the cable. Cable Requirements Cables used with the cable glands should meet the following criteria: • Outdoor-rated • UV-stabilized • Diameter of 0.25 to 0.29 inches (6.5 to 7.5 mm) Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 69: Installing Cable Glands

    The cable glands supports up to three terminated cable connectors. Repeat steps 4 to 6 to thread Note additional cable connectors. Figure 34: Inserting the Cable Into the Split Gasket Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 70: Connecting The Console Port

    Connecting the Console Port To configure the router through the Cisco IOS CLI, you must establish a connection between the router console port and either a terminal or a PC. The console port that is located on the router interior is labeled CONSOLE.

  • Page 71: Connecting Network Cables

    Warning 1001 The Cisco ASR 901S Series Aggregation Services Router uses a RJ-45 port for the console port. Complete the following steps to connect a terminal or a PC running terminal emulation software to the console port on the router:...
  • Page 72 Ensure that there is no gap between the bulkhead and the copper port connector. Figure 38: Locking the Bulkhead to Copper Port No gap between bulkhead and Cu port Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 73: Connecting Sfp Cables

    Connect the other end of the RJ45 cable to the BTS patch or demarcation panel at your site. Connecting SFP Cables Materials Required IP65 SFP cable (Cisco part number: 72-5541-01) Figure 40: IP65 Compliant SFP Cable Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 74 Insert the SFP cable connector into the SFP port connector until the connector snaps into place. See call-outs 1 and 2 in the following figure. Figure 41: ASR 901S Router Connected With SFP Cables External IP65 SFP cable Copper (Cu) port connector Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 75 Insert the SFP module patch cable into the SFP module until you feel the connector on the cable snap into place in the rear of the slot. See call-outs 4 and 5 in the above figure. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 76 Installing the Router Connecting Network Cables The SFPs supported on the Cisco ASR 901S Series Aggregation Services Router is dependent on Note the router chassis model. For the list of SFPs supported on the router, see Table 6: SFP Modules...

  • Page 77: Connecting To The Alarm Port

    Management Ethernet Port Pinouts, on page Dressing Router Cables Ensure all Cisco router cables are properly dressed so as not to interfere with each other or other pieces of equipment. Use local practices to ensure that the cables attached to your router are properly dressed.
  • Page 78 Reading LEDs , on page Step 3 Replace the reset button screw and use a Phillips screwdriver to tighten to 22 to 24 in. lbs (2.49 to 2.71 Nm). Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 79: Accessing The Router In Freezing Temperature

    • Properly connect the power, network, and interface cables. Interpreting Bottom-Panel LEDs The Cisco ASR 901S Aggregation Services Router provides three LEDs on the bottom panel to monitor conditions and to aid in troubleshooting problems. For a description of the LEDs, see...

  • Page 80: Using Clis For Flash Memory And Directory Procedures

    Installing the Router Using CLIs for Flash Memory and Directory Procedures Complete these steps to power on the Cisco ASR 901S Aggregation Services Router and verify its initialization and self-test: Procedure Step 1 Remove the tape from the circuit breaker switch handle.

  • Page 81: Displaying Contents Of The Flash Memory

    To release the memory space occupied by a deleted file, enter the squeeze flash: command. The following is sample output for deleting a Cisco IOS file from the flash memory, and releasing the memory space originally occupied by the file.

  • Page 82: Displaying File Content

    Router# more flash:ngmwr-advipservicesk9-mz 00000000: 7F454C46 01020100 00000000 00000000 .ELF .... 00000010: 00020061 00000001 80008000 00000034 ...a ...4 00000020: 00000054 20000001 00340020 00010028 ...T ..4..( Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 83: Enter A Directory And Determine The Current Directory

    The following example shows output for the following actions: • Entering the home directory of a flash memory card (flash:/) • Verifying that you are in the flash:/ directory Router# cd flash: Router# pwd flash:/ Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 84: What To Do After Installing The Hardware

    What to do After Installing the Hardware What to do After Installing the Hardware After you install the router hardware, refer to the Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide for the software configuration information. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide...

  • Page 85: Appendix A Troubleshooting

    If you cannot locate the source of the problem, contact a customer service representative for information on how to proceed. For technical support information, see the Cisco Information Packet publication that shipped with your router. Before you call, have the following information ready: •...

  • Page 86: Troubleshooting The Power And Cooling Systems

    If the router reaches a temperature of 248°F (120°C), the power supply cycles itself to prevent the router from exceeding the maximum temperature while being powered up. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 87: Troubleshooting Cables And Connections

    For warranty disconnected. information, refer to the Cisco Information Packet publication that shipped with your order or contact customer service. Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 88: Reading Leds

    The following table summarizes the LEDs on the chassis of the router. These LEDs are common to all chassis models, however, these LEDs may be turned off using Cisco IOS CLIs. By default all three LEDs are enabled. LED Label...

  • Page 89: Appendix B Specifications And Part Numbers

    Product Specifications, page 82 Components and Options The tables in this section list the hardware parts and part numbers available for the Cisco ASR 901S Series Aggregation Services Router. Table 5: Part Numbers of Chassis Models and Accessory Options for the Cisco ASR 901S Series Aggregation Services...
  • Page 90 Dust cap for antenna 29-8328-01 (maximum order: 1) 72-5561-01 A901S-DC-O-1M= DC power cable, 16 AWG,3 core, 600 water resistant,1 meter, open end (maximum order: 1) SL-A901-B Software license: Base license (maximum 1) Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 91 CWDM-SFP-1590, CWDM-SFP-1610, ranging from DWDM-SFP-3033 to DWDM-SFP-6141 (40 wavelengths) The following table lists the part numbers of the spares supported on the Cisco ASR 901S Series Aggregation Services Router. Table 7: Part Numbers of Spares Supported on the Cisco ASR 901S Series Aggregation Services Router...

  • Page 92: Product Specifications

    License (1588 Boundary Clock) Product Specifications The following tables list product, power, and environmental specifications, and safety and compliance information for the Cisco ASR 901S Series Aggregation Services Router. Table 8: Cisco ASR 901S Series Aggregation Services Router Specifications Description...
  • Page 93 (connected to the I2C bus of the CPU) Power supplies 1 power supply (AC or DC) Mean Time Between Failure 150,000 hours (MTBF) Table 9: Power Specifications Description Specifications Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 94 104°F (40°C) and 95% RH for 96 hrs Section 4.1.1.3 of GR-63 or Section 9.3 of ATIS-0600010.2007 Operational humidity <5% to 100%, RH condensing (GR-3108, Issue 2, Class 4) Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 95 Dwells at resonant frequency for 100,000 cycles at 3G in each axis. vibration Earthquake, Zone 4 Equipment complies with earthquake tests per sections 4.4.1 and 5.4.1 of GR-63 or ANSI TI-329 (GR-3108 Issue 2) Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 96 • EN/IEC61000-4-5 Surge • EN/IEC61000-4-6 Immunity to Conducted Disturbances Network Equipment Building This product is designed to meet the following requirements: Standards (NEBS) • GR-63-CORE • GR-1089-CORE • GR-3108-CORE, Class 4 Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 97 • IEEE-802.3ah ◦ 1000BaseL • ANSI X3.263-1995 ◦ 1000Base-Z • ISO/IEC 9314-3 ◦ 1000Base-E ◦ 1000Base-BX-U ◦ 1000Base-BX-D ◦ DWDM-SFP-GE: ◦ CWDM-SFP-GE: ◦ 10000Base-S ◦ 10000Base-L ◦ 10000Base-Z ◦ 10000Base-E Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 98 Specifications and Part Numbers Product Specifications Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

  • Page 99: Appendix C Cable Specifications

    A P P E N D I X Cable Specifications If you prefer to build your own cables, this appendix provides cable specifications for the Cisco ASR 901S Series Aggregation Services Router. The appendix includes the following sections: • Gigabit Ethernet Connector Pinouts , page 89 •...

  • Page 100: Sfp And Sfp Port Pinouts And Cable Specifications

    RX D- SFP and SFP Port Pinouts and Cable Specifications The following figures show the SFP and SFP modules supported by the Cisco ASR 901S Series Aggregation Services Router. Pins not listed in the tables in this appendix are not connected.
  • Page 101 SFP and SFP Port Pinouts and Cable Specifications The Cisco ASR 901S Series Aggregation Services Router supports the SFP module patch cable, which is a 0.5-meter copper passive cable with SFP module connectors at each end (see the following figures).

  • Page 102: Console Port Signals And Pinouts

    Console Port Signals and Pinouts Console Port Signals and Pinouts The Cisco ASR 901S Aggregation Services Router provides an optional console kit, which contains the cable and adapters to connect a console terminal (an ASCII terminal or PC running terminal emulation software).

  • Page 103: Identifying A Rollover Cable

    (see figure below). If you purchased your cable from Cisco Systems, pin 1 is white on one connector, and pin 8 is white on the other (a rollover cable connects pins 1 and 8, 2 and 7, 3 and 6, and 4 and 5).

  • Page 104: Alarm Port Pinouts

    Alarm Port Pinouts Alarm Port Pinouts The following table lists the pinouts for the alarm port (RJ45) on the Cisco ASR 901S Series Aggregation Series Router. The router supports four alarm inputs. The alarm input is a dry contact alarm port. Use the alarm CLI to define each alarm input to respond to a normally open or closed dry-contact closure and to define the alarm severity as minor, major, or critical.
  • Page 105 Cable Specifications Management Ethernet Port Pinouts Signal Name Description RxD_P — RxD_N — TxD_P — — Not connected — Not connected TxD_N — — Not connected — Not connected Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...
  • Page 106 Cable Specifications Management Ethernet Port Pinouts Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01...

Table of Contents