Tone Volume; F Codes - Kenmore 911.49042 Use & Care Manual

OPERATION
Oven Control, Clock and Timer
(cont.)
This feature allows you to adjust the
tone volumes to a more acceptable
volume. There are three possible
volume levels.
_1.
G
Touch the BAKE and
BROIL pads at the same
time for 3 seconds, until
the display shows "SF."
Touch the lIGHT pad.
The display will show
"2 BEEP." This is the
middle volume level.
Touch the lIGHT pad
again. The display will
show "3 BEEP." This is
the loudest volume level.
Touch the lIGHT pad
again. The display will
show "1 BEEP." This is
the quietest volume level.
For each time the level
is changed, a tone will
sound to provide an
indication of the
volume level.
Touch the START pad to
activate the level shown.
If you set an oven function and the
control beeps while the display is
flashing "F" and a number or letter
such as "F4" or "Fd" there may be a
problem with the control or oven.
Touch the ClEAR/OFF pad. If the
function code repeats, disconnect
all power to the oven for at least 30
seconds and then reconnect the
power. Try setting the function again.
If the code repeats again, write down
the flashing code and call for service.
Tell the technician what code was
flashing.
11
20P309-3 ENv02 2/14/03, 2:48 PM