Timed Oven Functions; Clock; Kitchen Timer - Kenmore 911.33465 Use & Care Manual

OPERATION
Clockand Timer
The clock must be set for the correct
time of day before a delayed oven
function can work properly,, The time
of day cannot be changed during a
timed oven function, but can be
changed during a bake or broil
function
HOW TO SET THE CLOCK
1. Press the TIMER/CLOCK pad,
2. Press the + and!or - pads to set
the time,
3. Press the START pad
RECALL THE CLOCK
While using your oven for cooking,
press the TIMER/CLOCK pad if you
wish to check the time of day, The
current time of day witl show in the
display_
POWER FAILURE
If you have experienced a power
failure, the time wilt flash in the display
and will be incorrect Reset your
clock.
Any oven cooking function that was in
process will need to be reset°
The Kitchen Timer is used to
time cooking processes or other
household activities It does not
control the oven, It can be set for up
to 9 hours and 59 minutes It will
count down in minutes until the LAST
60 SECONDS is reached, then the
control will beep once When the
countdown reaches ZERO, the
control will beep 3 times followed by
one beep every 6 seconds until the
TIMER/CLOCK pad is pressed The
6-second beep can be removed for
future cycles if desired For directions
on removing this continuous beep,
see Tones on the following page
HOW TO SET THE TIMER
1. Press the TIMER/CLOCK pad
2. Press the + and/or- pads to set
the time
3. Press the START pad
4 When the countdown has reached
zero, press the TIMER/CLOCK
pad to turn off the beep
To cancel the timer during the
countdown, press the TIMER/CLOCK
pad twice,
9