Back to Contents Page
Display
Dell™ Inspiron™ 9400 Service Manual
Display Assembly
Display Bezel
Display Panel
Display Latch
Display Assembly
Removing the Display Assembly
CAUTION:
Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
computer.
1. Follow the instructions in
Before Working Inside Your
2. Turn the computer upside down and loosen the two captive screws on the Mini-Card cover.
NOTE:
You must detach the Mini-Card antennas (see
antenna cables from the card. If one is not installed, detach the antenna cables from their secured location.
3. Disconnect the antenna cables from the Mini-Card, if applicable.
1
antenna cables
4. Turn the computer top-side up.
Before Working Inside Your
Computer.
step
3) before you can remove the display assembly. If a Mini-Card is installed, disconnect the
Computer) before working inside the