Table of Contents
Advertisement
Display assembly
Removing the display assembly
CAUTION:
The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
WWAN
card.
NOTE:
This procedure applies only to computers shipped with a WWAN card installed.
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
Figure 41. Removing the display assembly
74
Removing and installing Field Replaceable Units (FRUs)
Before working inside your
computer.
Advertisement
Table of Contents
