Display Assembly; Removing The Display Assembly - Dell i1470-2932CRD - Inspiron 1470 Cherry Service Manual

Service manual
Hide thumbs Also See for i1470-2932CRD - Inspiron 1470 Cherry:
Table of Contents

Advertisement

Back to Contents Page
  Display
Dell™ Inspiron™ 1470/1570 Service Manual 
  Display Assembly
  Display Bezel
  Display Panel and Cable
 
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
 
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
 Display Assembly
 

Removing the Display Assembly

 
1. Follow the procedures in
Before You
 
2. Remove the battery (see
Removing the
 
3. Remove the module cover (see
 
4. Disconnect the antenna cables from the Mini-Card (see
 
5. Remove the two screws on the base of the computer that secure the display assembly to the computer base.
 
6. Remove the power button cover (see
 
7. Remove the keyboard (see
 
8. Disconnect the display cable and remove the screw from the system board.
 
9. Pull the Mini-Card antenna cables up through the slot in the computer base.
 
10. Note the routing of all the cables and remove them from their routing guides.
Begin.
Battery).
Removing the Module
Cover).
Removing the
Removing the Power Button
Removing the
Keyboard).
Removing the
Mini-Card).
Cover).
Battery) before working inside the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron 1470Inspiron 1570

Table of Contents